OUR PRODUCTS

Previous
Next

Concrete Nails

Foreign trade production standard, hard and durable! Product quality guarantee, each nail is inspected carefully before shipment. the actual photo shows every detail, every ….

Previous
Next

Panel Pins/Brad Nails

Braid nails and finish nails are both used in carpentry, air compressor-operated nails are operated on the surface of wood materials using guns. Most of the times, Brad’s….

Previous
Next

Common Wire Nails

Wires of wire are made of wires, which are usually pulled through a series of dying to reach a specific diameter, then cut into small rods which are then formed in the nails….

Concrete Nails

Foreign trade production standard, hard and durable! Product quality guarantee, each nail is inspected carefully before shipment. the actual photo shows every detail, every design is just right the quality is better, the hardness is harder, the rust prevention time is longer. high standerd galvanized treatment, refused to rust, durable bright.

Factory direct sale, the price is cheaper, the quality is more assured.

Concrete nails with special material are specialty nails compared to normal iron nails.

It is difficult, the leg is generally smaller and thick and has excellent peak and fixing strength. With these features, make nails and fasteners perfect for solid nail firms and strong sites. The normal diameter size for galvanized concrete nail 1.7 nails is 5.0 mm and the length of the nail goes from


Features:

  • Material: High Carbon
  • Steel Wire 45% / 55%
  • Finished: Electro Galvanized
  • Shank: Angular Spiral / Round Smooth / Twilled / Grooved
  • Point: Diamond Point
  • Head: Flat
  • Hardness: HRC53
  • Size Chart:

Packaging Box: 

  • 1 Kg box x 25 Boxes per cardboard box tied inside a bag for more protection.
  • Other options are also available according to personal needs.

Panel Pins / Furniture Nails

Braid nails and finish nails are both used in carpentry, air compressor-operated nails are operated on the surface of wood materials using guns. Most of the times, Brad’s nails are often called finishes nails or finishing nails because their shapes are not really different from actual finishing nails. Brad nails are usually used in trim carpentry, where carpenters work on doors, casing or molding; Finnish nails are used in a Finnish or detail carpentry, such as cabinets and storage on wood containers. This is because most of Brad Nails are Flat heads that can be seen on wood, while in the Finnish nails there are such head which are difficult to pay attention and they can only be painted to mix. The finished nails are generally more firmly operated so that their heads are submerged or submerged in order to hide them. opinion. Brad nails are used to fix the wood or to keep the two pieces together and the glue between the pieces can be removed carefully after drying. Finish the nails, due to being “headless”, only used as the final nail, which operates on wide carpentry work

Factory direct sale, the price is cheaper, the quality is more assured.

Concrete nails with special material are specialty nails compared to normal iron nails.

It is difficult, the leg is generally smaller and thick and has excellent peak and fixing strength. With these features, make nails and fasteners perfect for solid nail firms and strong sites. The normal diameter size for galvanized concrete nail 1.7 nails is 5.0 mm and the length of the nail goes from

Features:

  • Material: High quality low carbon steel Q195 / Q215 / Q235
  • Finished: Bright finacle / Electro Galvanized /  Hot Dipped Galvanized / Stainless Steel 304 & Bris finals / Copper
  • Shank: Nail Head / Shank / Point (Please refer to any other word attachment for details)
  • Size Chart: 

Packaging Box:

  • External factors such as air and moisture today cause the recharge of nails in the best pack nails available in the markets.
  • We have ensured “air tight packaging”, which ensures the safety of nails from the atmosphere so that the fight can be prevented.
  • We are welcome to order either boxes or pouches for different sizes of packaging solutions according to the requirements of customers.

Packing Size:

  • 250 GM
  • 500 GM
  • 1 KG
  • 2.5 KG

Common Wire Nails

Wires of wire are made of wires, which are usually pulled through a series of dying to reach a specific diameter, then cut into small rods which are then formed in the nails. The tip of the nail is usually cut from the blade; The head is formed by resizing the other end of the rod at high pressure. The other die is used to cut grooves and ribbons. Wire nails were also known as “French Nails” for their native country

Simple nails for wood are usually soft, low carbon or “light” steel (approximately 0.1% carbon, rest iron and perhaps a mark of silicon or manganese)

Packing size

  • 2.5 Kg
  • 25 Kg
  • 50 Kg

Features:

  • Material: High quality low carbon steel Q195 / Q215 / Q235
  • Finished: Bright finacle / Electro Galvanized / Harded / Hot Dipped Galvanized / Stainless Steel 304 & 316 / Phosphate coated / green Vinyl / Coated Cement
  • Shank: Smooth / Screw / Ring / Barbed / Fluted
  • Source: Diamond, Long diamond, belt diamond, sugar, postal, post office.
  • Head: Flat Head, checked coopers / Duplex head / Brad head / oval head / Casing head / Cup head / Large head.
  • Usage: Construction / Housing / Other Industry sector.
  • Size Chart: 
  • Packaging Box:
  • Plastic bag, Carton box, wodden box or according to  your requirement.

Cover Block

Advantages of Cover Block

Concrete Spacers prevent rebars from corrosion, protect them from fire to certain length of time and help to provide proper transfer of stresses from concrete to steel rebars, by helping provide proper cover to rebars.

  • Protection of the Rebar from the environment by providing a physical barrier.
  • It provides thermal insulation, which protects the reinforcement bars from fire.
  • To give reinforcing bars sufficient embedding to enable them to be stressed without slipping.
  • Ensures that concrete completely encircles Rebar allowing passivation.
  • Ensures that concrete completely encircles Rebar allowing complete bond to develop. Allows the Rebar to assume position and act as designed.
  • Prevents staining.
  • Provides a time lag in case of fire.

A cover block is basically a spacer that is used to lift the rebar matrix off the ground so that concrete may flow below the rebar.

In order to prevent corrosion of the rebar, it has to be totally sheathed in concrete. It usually needs about 2 to 3 inches of coverage on all sides. So the cover block lifts the rebar up by about 2 to 3 inches and becomes a permanent and integral part of the poured concrete, make certain that no part of the rebar sags and minimizes that required concrete coverage throughout the pour.

 

  Product CodeSizePacking per Bag
     N2020mm185 nos
     N2525mm160 nos
     N3030mm135 nos
     N4040mm100 nos
     N5050mm70 nos
New Products updates

Subscribe